Small Bar Lock with Flip Closure 2 3/8" (6cm)

Small bar shaped flip lock
1 per pack
Easy 2 screw install, included
Choose finish
Size: Width 2 3/8" (6 cm) x Height 3/8" (1 cm)

Open ended
Emmaline brand hardware
Color may vary slightly from photo

These little cuties are not very deep inside and can really handle a front flap that is about 1/8" (3mm) thick or one that can be compressed to be that thick (foam). I recommend a strong layer of bag stabilizer, such as Peltex, Timtex, or Fast2Fuse inside your front flap for strength. 

To install:  

• Position the Bar Lock over the finished edge of a bag flap or strap closure and a removable pen/marker/chalk to mark cutting holes. You can notch out the hole for the flip closure completely, but I would use a leather punch or awl to cut out the holes for the screws.
• Use clear drying fast grab glue such as Beacon 3-in-1, E-6000 or Gutterman glue on both pieces so that they stay in place. 
• Use a mini screw driver to screw in the 2 provided screws. 
• Simply attach the flip part on the bag front using the provided washer, using the same technique as you would for any magnetic snap.

** Caution: This bag lock could be bumped and flipped open. This please be sure to test and see if it suits your project.